BD Logic Guía para resolver problemas descargar pdf (Pagina 11)

1. Insert a BD™ Test Strip into the test strip

slot. The monitor turns on and briefly

displays the “All Segments” display.

2. While the flashing code number appears

on the display, code the monitor to match

the test strip being used. Press the right

or left arrow button (within 3 seconds)

to match the code printed on the test

strip vial.

When you first use your monitor, the

display shows “– – –.” This means the

monitor is not coded and needs to be

coded.

Getting Started • 13

HOW TO CODE YOUR MONITOR

Monitor is off, with no test strip inserted in the test strip slot.

NOTE:

If your monitor advances to the blinking blood drop

before you coded your monitor to match the test strips being used, take

out the test strip from the test strip slot and reinsert to start again.

Insert Test Strip

12 • Getting Started

WHY CODING YOUR MONITOR BEFORE

TESTING IS NECESSARY

Your BD Logic

Blood Glucose Monitor must be manually “coded” to

match the vial of test strips you will be using in order

to provide accurate blood glucose test results.

Coding Your Monitor

IMPORTANT:

If the code number on the display does not match the

code number on the test strip vial, the test results may not be accurate.

You should code your monitor:

•When you first receive your new monitor,

before you test your blood glucose.

• If the monitor display shows flashing

“– – –” as pictured.

• Before using each new box of

test strips.

Code the

Monitor

(Continued on next page.)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Sin comentarios

BD Logic Guía para resolver problemas Pagina 11